Francia

FRANCIA

PRFrancia01

FRANCIA_Metal anatomic support

Francia, the classical strong structure made of bended steel of 50×30 mm and steam bended plywood slats inserted directly into the frame by means of special rubber slat holders.
Ideal as an inlayed bedspring with screw-in legs to be fixed to the diagonal corner plates and suitable for any kind of mattress.
Available in following versions:
• Single size 80/84/90×190 – 80/84/90×195 – 80/84/90×200 cm
• Small double size 120×190 – 120×195 – 120×200 cm
• Double size 140/160/164/170×190 – 140/160/164/170×195 – 140/160/164/170×200 cm

FRANCIA A.T.P.

PRFrancia02

• Bended metal profile in tube 50×30 mm.
• Manual head and feet elevation.
• Single slat system with slats of 68 mm inserted into the metal frame, 3 slats with rigidity adjusters.
• Provided with mattress holders and screw-in metal legs Ø50 mm.

FRANCIA Singolo

PRFrancia03

• Bended metal profile in tube 50×30 mm.
• Single slat system with slats of 68 mm inserted into the metal frame.
• Provided with screw-in metal legs Ø50 mm.

FRANCIA Matrimoniale diviso

PRFrancia04

• Bended metal profile in tube 50×30 mm.
• Single slat system with slats of 68 mm inserted into the metal frame, divided in the middle by a double supporting bar.
• Provided with screw-in metal legs Ø50 mm.

FRANCIA Matrimoniale intero

PRFrancia05

• Bended metal profile in tube 50×30 mm.
• Single slat system with slats of 68 mm inserted into the metal frame across the entire frame and supported in the middle by a double bar.
• Provided with screw-in metal legs Ø50 mm.

Simb-strut-PS-01

FRAME
Solid structure of metal profile 50×30 mm with rounded corners.

Simb-doghe-PS-01

SLATS
The 68 mm-slats are inserted into the frame by means of special rubber slat holders. They can be provided with rigidity adjusters on the lumbar zone. (optional)

Simb-manuale-PS-01

MANUAL ADJUSTMENT
Manual head and feet elevation.