Olimpia, thanks to the close spaces between the slats, becomes an ideal support for all “soft” mattresses.
The coloured slats of the shoulders’ zone, which are either milled or provided with rigidity adjustment, optimize the personalization of each single sleeping surface, through their higher elasticity.
The sturdy structure made of welded steel profile of
50×30 mm, can be used as a freestanding bed and an inlayed bedspring.
Available in following versions:
• Single size 80×190 cm
• Double size 160×190 cm

• Straight welded metal profile in tube 50×30 mm finished with plastic corners.
• Manual head and feet elevation.
• Single slat system with slats of 68 mm inserted into the metal frame, 2 coloured and milled slats on the shoulder part and 3 slats with rigidity adjusters.
• Provided with mattress holders and screw-in metal legs Ø50 mm.

• Straight welded metal profile in tube 50×30 mm finished with plastic corners in .
• Single slat system with slats of 68 mm inserted into the metal frame, 2 coloured and milled slats on the shoulder part and 3 slats with rigidity adjusters.
• Provided with screw-in metal legs Ø50 mm.

• Straight welded metal profile in tube 50×30 mm with double supporting middle bar and finished with plastic corners.
• Single slat system with slats of 68 mm inserted into the metal frame, 2 coloured and milled slats on the shoulder part and 3 slats with rigidity adjusters.
• Provided with screw-in metal legs Ø50 mm.

FRAME
Solid structure of metal profile 50×30 mm with plastic corners.

SLATS
The 68 mm-slats on the shoulder zone are milled granting a higher elasticity and are provided with ridigity adjusters on the lumbar zone. Inserted into the frame by means of special rubber slat holders.

MANUAL ADJUSTMENT
Manual head and feet elevation.